Digital Magnetic
Induction Generator
Zero-emission baseload power · 5MW base · scalable to 1000MW
Overview
The DMIG is our flagship clean-energy platform — a non-combustion power system delivering continuous, dispatchable electricity at 97% efficiency. It does not depend on weather, fuel supply, or grid availability.
What's Included
Non-combustion generation
Power is induced via rotating magnetic fields — no fossil fuels, no thermal step, no waste heat or emissions.
97% electrical efficiency
Verified across the 25/50/75/100% load curve: 94.1%, 96.3%, 96.9%, 97.0%.
Modular & stackable
5MW base unit · series-stackable to 1000MW plants.
Grid-code compliant
IEEE 519 THD < 5% · IEC 61000-3-7 flicker · automated sync · anti-islanding · SCADA telemetry.
Black-start & load-following
Energize the grid from total shutdown; transition seamlessly to island mode.
Zero radiation · zero noise
Low vibration · indoor/outdoor · −55 °C to +70 °C operating range.
Technology Review
The DMIG contains a number of rotors, each attached to a central spinning shaft. Each shaft is comprised of a series of discs with magnets attached to the perimeter of each disc.
A small source battery provides the initial voltage that engages the rotors. As the rotors spin, each magnet on the disc passes a series of copper coil assemblies fixed at the same rotational height to the interior of the surrounding chassis. Each coil assembly is coupled with an electronic circuit unit that collects all output and directs a portion of the voltage back to the source battery to maintain rotational charge — excess voltage is usable output.
Grid Interface
The DMIG grid interface uses a layered protection scheme: overcurrent, voltage, and frequency relays, plus differential and anti-islanding protection — all integrated with automated synchronizing and SCADA control for safe, seamless operation and immediate isolation in case of abnormal grid conditions.
Medium-voltage output
Step-up transmission level
THD — IEEE 519 compliant
Key Specifications
5 MW / 4.9 MVA
480V 3-Phase
60 Hz · programmable ±0.5/1/2/4/6/8%
Sine wave · Delta topology
CUL · FCC Part 15 A · ISO 9001/14001 · UL 1778 · CE
91 inches